Page 1 of 1

Garys new EVO program

Posted: Tue Nov 12, 2019 8:50 am
by lanerider
Just set up Gary's new EVO program just need some dry land to try it out i will report back with results

Re: Garys new EVO program

Posted: Tue Nov 12, 2019 5:50 pm
by Gary
Good luck
Here is the video
https://youtu.be/9yuPZUI8das

Re: Garys new EVO program

Posted: Sun Nov 24, 2019 7:27 pm
by lanerider
used garys evo prog today on stubble and it produced a very worn roman its a steady prog in fact complete opposite to the sonar prog so i now use both subject to the state of the field

Re: Garys new EVO program

Posted: Mon Nov 25, 2019 10:41 am
by seasider
How do you mean, "the complete opposite" to Sonar ? I'm thinking of adding EVO to my control box but your comment puzzled me.

Re: Garys new EVO program

Posted: Mon Nov 25, 2019 1:06 pm
by lanerider
i was using evo on wet stubble with power lines and 50 other detectorists it was fine sonar is my usual prog but not on this dig i could not get it to settle down

Re: Garys new EVO program

Posted: Mon Nov 25, 2019 1:19 pm
by seasider
I see, Thanks.

Re: Garys new EVO program

Posted: Mon Nov 25, 2019 1:34 pm
by muddyboots
If you were using a HF coil, I have found that if you set the coil to a frequency, as in my case, 54 kHz, it will lessen or negate EM interference.

Re: Garys new EVO program

Posted: Mon Nov 25, 2019 2:44 pm
by lanerider
Yes i have hf coil thanks for that ill try when im back on the field again

Re: Garys new EVO program

Posted: Mon Nov 25, 2019 9:05 pm
by Gary
Thanks for your feedback guys