Catching and scratching with the XP Deus

.
http://www.xp-detectors.co.uk/
User avatar
Gary
Site Admin
Posts: 371
Joined: Fri Apr 22, 2016 12:06 pm
Location: Buckinghamshire UK
Flag: Great Britain

Catching and scratching with the XP Deus

Postby Gary » Mon May 16, 2016 12:51 pm

Here is a short video showing how good the Deus 13" coil and Full - Tone setting work in harmony, it shows how well the big coil deals with Iron.
http://www.xp-detectors.co.uk/catching-scratching-deus/

Graham Grant
Posts: 2
Joined: Mon May 16, 2016 12:47 pm
Flag: Great Britain

Re: Catching and scratching with the XP Deus

Postby Graham Grant » Mon May 16, 2016 1:04 pm

Hi,Gary please excuse my lack of knowledge with the XP deus haven't had it to long,understand full tones,but what is the sifter program,is it already in the machine or has to be keyed in.Regards,Graham. :?

User avatar
Gary
Site Admin
Posts: 371
Joined: Fri Apr 22, 2016 12:06 pm
Location: Buckinghamshire UK
Flag: Great Britain

Re: Catching and scratching with the XP Deus

Postby Gary » Mon May 16, 2016 2:24 pm

Hi Graham
You need to key it in, here are my Hot and Sifter settings.

Hot
Load up the Deus fast program....Change
Discrimination.....between 0 and 5, if you have problems identifying differences between low tones use disc 5 and dig every repeatable tone
Tones....Full tones
Iron Vol.....0
Audio response....3-4
Here we have some big changes, at first don't be afraid to use a discrimination of 3 - 5 until you get used to the audio feedback.
*Discrimination notes : Disc 0 will accept all the ground noise as a baseline, this is good if you want to hear ground changes. Disc 1 will eliminate ground noise and only accept Iron as a baseline.

Sifter
Load up the HOT program and change :
Discrimination : 0
Sensitivity : 86
Audio Response : 4
TX Gain : 1
Ground Manual : 88

Graham Grant
Posts: 2
Joined: Mon May 16, 2016 12:47 pm
Flag: Great Britain

Re: Catching and scratching with the XP Deus

Postby Graham Grant » Mon May 16, 2016 5:20 pm

Thanks for that much appreciated ;)

ozy
Posts: 59
Joined: Sun May 08, 2016 10:07 pm
Flag: Great Britain

Re: Catching and scratching with the XP Deus

Postby ozy » Mon May 16, 2016 10:38 pm

thanks for sharing gary

MrBeasley
Posts: 392
Joined: Thu Apr 28, 2016 5:34 pm
Location: Bedford
Flag: Great Britain

Re: Catching and scratching with the XP Deus

Postby MrBeasley » Mon May 16, 2016 11:34 pm

If only more UTube producers were as informative. Your videos are so good Gary.

User avatar
Paffman
Posts: 9
Joined: Mon May 16, 2016 10:20 pm
Location: Witnesham, IPSWICH, Suffolk
Flag: Great Britain

Re: Catching and scratching with the XP Deus

Postby Paffman » Mon May 16, 2016 11:40 pm

Newbie question alert....

in the Sifter setup...... what is Ground Manual??

Sifter
Load up the HOT program and change :
Discrimination : 0
Sensitivity : 86
Audio Response : 4
TX Gain : 1
Ground Manual : 88

MrBeasley
Posts: 392
Joined: Thu Apr 28, 2016 5:34 pm
Location: Bedford
Flag: Great Britain

Re: Catching and scratching with the XP Deus

Postby MrBeasley » Tue May 17, 2016 12:25 am

I think it means ground balance manually set at 88. I'm sure Gary will confirm mate.

User avatar
Gary
Site Admin
Posts: 371
Joined: Fri Apr 22, 2016 12:06 pm
Location: Buckinghamshire UK
Flag: Great Britain

Re: Catching and scratching with the XP Deus

Postby Gary » Tue May 17, 2016 6:38 am

Confirmed manual, don't use tracking or pumping there is so much Iron the machine can't see the ground to make a correct adjustment.
So play the safe option 88-90 manual which is fixed


Return to “The XP Classroom”

Who is online

Users browsing this forum: No registered users and 1 guest